Panasonic NV-DS50A User Manual
18
CAMERA Mode
Recording
When the [AUTO] Indication
1
is displayed on the screen, the
Movie Camera automatically adjust the focus and white balance. In
some cases, they cannot be adjusted automatically and need to be
adjusted manually. (
some cases, they cannot be adjusted automatically and need to be
adjusted manually. (
1
Set the [VCR/OFF/CAMERA/M-CARD] Switch to
[CAMERA].
[CAMERA].
≥The [POWER] Lamp lights up.
2
2
Press the [AUTO/MNL] Button for about 1 second to
display the [AUTO] Indication.
display the [AUTO] Indication.
3
Press the Recording Start/Stop Button.
≥Recording starts.
≥After the [RECORD] is displayed, it changes to [REC].
≥After the [RECORD] is displayed, it changes to [REC].
3
ª To Pause the Recording
Press the Recording Start/Stop Button again.
The [PAUSE] Indication is displayed.
4
≥If the Recording Pause Mode continues for more than 6 minutes,
the power is turned off automatically for tape protection and power
conservation. To resume recording from this condition, turn on the
power again.
conservation. To resume recording from this condition, turn on the
power again.
ª To Check the Recording
By pressing the [
S] Button
5
briefly in the Recording Pause
Mode, you can play back the last few seconds of the recorded
scene.
≥The [CHK] Indication is displayed. After checking, the Movie
scene.
≥The [CHK] Indication is displayed. After checking, the Movie
Camera resumes the Recording Pause Mode.
ª To Finish the Recording
Set the [VCR/OFF/CAMERA/M-CARD] Switch to [OFF].
3
4
RECORD
REC
PAUSE
PAUSE
5
2
3
1
2
AUTO/MNL FOCUS
POWER
STILL/
P-IN-P
P-IN-P
BLC
MULTI
BLC
M-DEL
M-PLAY
M-STOP
AUTO
1
VCR
OFF
CAMERA
M-CARD
A-ENG.book 18 ページ ２００２年１月２８日 月曜日 午前１１時３２分