Panasonic PV-VM202 User Manual
7
1
4
5
6, 7
5
CAMERA
CARD P. B.
VCR
OFF ON
MODE
8
9
7
6
CAMERA
CARD P. B.
VCR
1
QUICK
100%
CHARGE
POWER
OFF ON
MODE
3
OPEN/EJECT
2
4
CAMERA
CARD P. B.
VCR
OFF ON
MODE
2
3
BACKLIGHT
CAMERA
STILL
POWER
POWER
POWER
Quick Guide
1
Charge the Battery.
(
l 12)
≥Connect the AC Cable to the AC Adaptor and plug it into Wall Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the charging
≥Attach the Battery to the AC Adaptor. (This will start the charging
process.)
≥After the [POWER] Lamp has lit up, the [CHARGE] Lamp flashes.
When the [100%] Lamp
1
on the AC Adaptor is lit, charging is finished.
≥Since the Battery will not be charged when the DC Cable is connected
to the AC Adaptor, disconnect it.
2
Attach the Charged Battery to the Palmcorder.
(
l 12)
3
Turn the Palmcorder on.
(
l 14)
≥Slide the
2
Switch to [ON]. (The [CAMERA] Lamp lights up.)
4
Insert the Cassette.
(
l 13)
≥Slide the [OPEN/EJECT]
Cassette compartment cover completely.
≥Insert the Cassette.
≥Press the [PUSH TO CLOSE]
≥Press the [PUSH TO CLOSE]
4
to load the Cassette.
≥Close the lower compartment Cover.
5
Start recording.
(
l 20)
≥Press the
5
Button. (Recording starts.)
≥Press the
5
Button again to pause the recording.
To View the Playback Picture
6
Switch to the VCR Mode, rewind the tape, and play the tape
back.
back.
(
l 28)
≥Set the
Switch to VCR mode. (The [VCR] Lamp lights up.)
≥Press the
7
Button. (Rewind the tape.)
≥Press the
8
Button. (Playback starts.)
≥Press the
9
Button. (Playback stops.)
7
Turn the Palmcorder off.
(
l 14
)
≥Set the
6
Switch to [OFF].
220P.book 7 ページ ２００２年３月２０日 水曜日 午前１１時６分