Sony HDRCX300 Manual

Page of 155
US
The Image Database File is damaged. Check 
the data base file by touching 
 (MENU) 
 [Show others]  [REPAIR IMG.DB F.] 
(under   [MANAGE MEDIA] category)  
the recording medium.
The memory card is damaged. Format the 
memory card with your camcorder (p. 61).
Incompatible memory card is inserted (p. 21).
 
Access to the memory card was restricted on 
another device.
There is something wrong with the flash.
The amount of light is not sufficient. Use the 
flash.
The camcorder is unsteady. Hold the camcorder 
steady with both hands. However, note that 
the camera-shake warning indicator does not 
disappear.
The drop sensor function is activated. You 
may not be able to record nor play back 
images.
The recording media is full. Delete unnecessary 
images (p. 34).
Photos cannot be recorded during processing. 
Wait for a while, then record.
Precautions
On use and care
Do not use or store the camcorder and 
accessories in the following locations:
Anywhere extremely hot, cold or humid. 
Never leave them exposed to temperatures 
above 60 
C (140 °F), such as under direct 
sunlight, near heaters or in a car parked in 
the sun. They may malfunction or become 
deformed.
Near strong magnetic fields or mechanical 
vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The 
camcorder may not be able to record properly.
Near AM receivers and video equipment. 
Noise may occur.
On a sandy beach or anywhere dusty. If 
sand or dust gets in your camcorder, it may 
malfunction. Sometimes this malfunction 
cannot be repaired.
Near windows or outdoors, where the LCD 
screen or the lens may be exposed to direct 
sunlight. This damages the inside of the LCD 
screen.
Operate your camcorder on DC 6.8 V/7.2 V 
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories 
recommended in these operating instructions.
Do not let your camcorder get wet, for example, 
from rain or sea water. If your camcorder 
gets wet, it may malfunction. Sometimes this 
malfunction cannot be repaired.
If any solid object or liquid gets inside the 
casing, unplug your camcorder and have it 
checked by a Sony dealer before operating it 
any further.
Avoid rough handling, disassembling, 
modifying, physical shock, or impact such 
as hammering, dropping or stepping on the 
product. Be particularly careful of the lens.
Keep the camcorder turning off when you are 
not using your camcorder.
Do not wrap your camcorder with a towel, for 
example, and operate it. Doing so might cause 
heat to build up inside.
When disconnecting the power cord (mains 
lead), pull it by the plug and not the cord (lead).
Do not damage the power cord (mains lead)