Panasonic PV-L354 User Manual
18
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Camera Recording
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 12).
• Insert cassette with record tab (page 12).
View recording scene on EVF (Electronic
Viewer Finder) or LCD (Liquid Crystal
Display) monitor.
Viewer Finder) or LCD (Liquid Crystal
Display) monitor.
Recording via EVF or LCD
Monitor
Monitor
1
Press LCD-OPEN to unlock the LCD
monitor. Swing LCD monitor fully
open and adjust viewing angle.
monitor. Swing LCD monitor fully
open and adjust viewing angle.
2
Set POWER to
CAMERA.
CAMERA.
• Be sure POWER
is fully turned to
CAMERA position.
CAMERA position.
• EVF or LCD monitor
turns on/off by the POWER switch.
• Both EVF and LCD monitor turn on
when LCD is at 180
° (see above left).
This allows both you and the subject
to view the recording.
to view the recording.
3
LCD : Adjust LCD monitor brightness
level. See “To adjust LCD
BRIGHT” below.
BRIGHT” below.
EVF : Look into EVF and adjust
VISION ADJUSTMENT to your
preference.
preference.
4
Set REC MODE to “SP” or “SLP” in
the CAMERA MODE Menu (page 14).
the CAMERA MODE Menu (page 14).
5
Press RECORD/PAUSE to start or
pause recording.
pause recording.
6
Set POWER to OFF when finished.
• To remove the cassette, slide the
TAPE EJECT switch (page 12).
Note:
• When Camcorder is aimed at excessively
• When Camcorder is aimed at excessively
bright objects, or bright lights, a vertical
bar may appear in the picture. This is
normal for the CCD pick-up. Try to avoid
this when possible.
bar may appear in the picture. This is
normal for the CCD pick-up. Try to avoid
this when possible.
• Using LCD monitor reduces battery
operation time. Return LCD monitor to
locked position when not in use.
locked position when not in use.
EVF or LCD Monitor
(Record/Pause mode)
1
VISION
ADJUSTMENT
ADJUSTMENT
3
Built-in
Microphone
Microphone
2
,
6
5
To adjust LCD BRIGHT
A
Press MENU for
MENU mode.
Press UP or DOWN
to select
MENU mode.
Press UP or DOWN
to select
LCD BRIGHT
.
B
Press M.FOCUS for
LCD BRIGHT
SETTING menu.
Press UP or DOWN
to adjust LCD
monitor brightness
level.
LCD BRIGHT
SETTING menu.
Press UP or DOWN
to adjust LCD
monitor brightness
level.
4
,
A
,
B
Rotating partially open LCD monitor
may block cassette door and damage
Camcorder body.
may block cassette door and damage
Camcorder body.
CAUTION
03.L454 Basic p18-20
03.11.17, 0:53 PM
18