Panasonic AG-3DP1G User Manual
11
Chapter
Men
u
Oper
ations
Item
Setting
Notes
USER FILE
Reads/writes user files (files other than SCENE FILES)
from/onto the SD memory card.
from/onto the SD memory card.
FILE SELECT:
Selects user files (1 – 4).
READ:
Reads the user file (1 – 4) settings stored on
the SD memory card.
WRITE:
Saves the current user file (1 – 4) settings to
the SD memory card.
TITLE RELOAD:
Reloads title list.
SD CARD FORMAT
Formats SD memory cards.
3D ASSIST Screen
Item
Setting
Notes
OUTPUT SEL
Sets where to output the effect of 3D assist function
controlled by the 3D ASSIST buttons (Z WFM/ALERT/
CONV.).
controlled by the 3D ASSIST buttons (Z WFM/ALERT/
CONV.).
LCD:
The effect of the 3D assist function is output to
the LCD monitor only.
LCD/EVF:
The effect of the 3D assist function is output
to the LCD monitor and viewfinder.
NEAR LEVEL
Selects the alert level for a short distance in the 3D
assist function.
assist function.
0.5%, 1%, 1.5%, 2%, 2.5%, 3%, 3.5%, 4%
• Use this item to set a guide for
safety shooting, preventing forward
divergence.
divergence.
FAR LEVEL
Selects the alert level for a long distance in the 3D
assist function.
assist function.
0.5%, 1%, 1.5%, 2%, 2.5%, 3%, 3.5%, 4%
• Use this item to set a guide for safety
shooting, preventing backward
divergence.
divergence.
DETECTION RANGE
Selects the detection range of the 3D assist function.
NARROW:
6.56 % (1080)
WIDE:
13.12 % (1080)
• Use this item to prevent excessive
separation due to backward
divergence.
divergence.
Z WFM SCALE
Selects the display mode of the 3D assist function.
NORMAL:
Displays all the detection area.
2 x :
Displays a clip in half the detection area.
OTHER FUNCTIONS Screen
Item
Setting
Notes
USER FILE
Saves user files to camera memory, loads them into
camera memory or initializes them. (For details, refer
to page 78, 107.)
camera memory or initializes them. (For details, refer
to page 78, 107.)
LOAD, SAVE, INITIAL
• This does not affect options in the
SCENE FILE screen.
• The TIME ZONE setting is not
initialized.
ACCESS LED
Determines whether or not the P2 card access LED
should light.
should light.
ON, OFF
ALARM
Sets the alarm sound output when an alarm occurs.
HIGH, LOW, OFF
REC TALLY
Selects the recording status indicator of the camera.
RED:
Red tally lamp lights.
GREEN:
Green tally lamp lights.
OFF:
The tally lamp does not light.
EVF BAT LED
Selects whether the BAT lamp inside the viewfinder is
to light or not when the remaining battery capacity is
below NEAR END.
to light or not when the remaining battery capacity is
below NEAR END.
ON, OFF
CLOCK SETTING
Sets the internal calendar (date)
For details, see [Setting Date and Time of Internal
Clock] (page 28).
For details, see [Setting Date and Time of Internal
Clock] (page 28).
____ indicates the factory setting