Panasonic VDR-D310 User Manual

LSQT1145

Setup

≥ Use the direction buttons (3,4,2,1) and

ENTER button in place of the joystick on the
main unit.

Press the MENU button to exit
the menu screen.

Setting date and time

When the unit is turned on for the first time, a
message asking you to set the date and time will
appear.
≥ Select [YES] and press the joystick. Perform

steps 2 and 3 below to set the date and time.

If the screen shows the incorrect date and time,
then adjust it.

¬Rotate the mode dial to select

Press the MENU button, then
select [BASIC]

# [CLOCK SET]

# [YES] and press the joystick.

Move the joystick left or right to
select the item to be set. Then,

move the joystick up or down to
set the desired value.

≥ The year will change as follows:

2000, 2001, ..., 2099, 2000, ...

≥ The 12-hour system is used to display the time.

Press the joystick to enter the
selection.

≥ The clock function starts at [00] seconds when

the joystick is pressed.

≥ After pressing the MENU button to finish the

setting, check the date and time display.

∫ Changing the date and time display style
Press the MENU button, then select [SETUP]
# [DATE/TIME] # desired display style and

press the joystick.
≥ You can also show or change the date and

time display by repeatedly pressing the DATE/
TIME button on the remote control.
(VDR-D310)

∫ Changing the display style
Press the MENU button, then select [SETUP]
# [DATE FORMAT] # desired display style

and press the joystick.

ENTER

[DATE]

[D/T]

[OFF]

Display style

Screen display

[Y/M/D]

2007.DEC.15

[M/D/Y]

DEC.15.2007

[D/M/Y]

15.DEC.2007

DEC.15.2007

DEC.15.2007 3:30 PM

LSQT1145.book 42 ページ２００６年１２月２８日　木曜日　午前９時３４分