Panasonic VDR-D300 User Manual
109
LSQT1011
W
it
h
o
the
r
pr
oduc
ts
With a printer (PictBridge)
With a printer (PictBridge)
(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
PictBridge. (Read the operating instructions for the printer.)
≥ Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select
.
1 Press the MENU button, then select [
SETUP]
# [
USB FUNCTION]
# [PictBridge] and press
the joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
The [
] indication appears on this unit’s
screen.
≥ If the [
] indication does not appear or
continues to flash, disconnect and then reconnect the
USB cable or check the printer, SD card and settings on
this unit.
USB cable or check the printer, SD card and settings on
this unit.
≥ Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)
cables.)
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
4 Move the joystick up or down to select the desired number of prints,
then press the joystick.
≥ You can set up to 9 prints.
≥ To cancel the setting, set the number of prints to [0].
≥ Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.
≥ To cancel the setting, set the number of prints to [0].
≥ Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.
5 Press the MENU button to display the PictBridge
menus.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Insert the plugs as far as they will go.
A
D250&300(P_PC)eng.book 109 ページ ２００６年１月２０日 金曜日 午後２時３分