Panasonic VDR-D300 User Manual
161
LSQT1011
Cautions for use
Ot
he
rs
≥ If the battery is warm, charging requires more
time than normal.
≥ If the temperature of the battery is extremely
high or extremely low, the CHARGE lamp
may continue flashing, and the battery may
not be charged. Wait until the appropriate
temperature is restored before charging the
battery again. If the battery still fails to
charge, something may be wrong with the
battery or AC adaptor. Contact your dealer.
may continue flashing, and the battery may
not be charged. Wait until the appropriate
temperature is restored before charging the
battery again. If the battery still fails to
charge, something may be wrong with the
battery or AC adaptor. Contact your dealer.
≥ If you use the AC adaptor near a radio, radio
reception may be disturbed. Keep the AC
adaptor 1 m (3.3 feet) or more away from the
radio.
adaptor 1 m (3.3 feet) or more away from the
radio.
≥ When using the AC adaptor, it may generate
whirring sounds. However, this is normal.
≥ After use, be sure to disconnect the AC
adaptor. (If it is left connected, a minute
amount of current is consumed.)
amount of current is consumed.)
≥ Always keep the electrodes of the AC
adaptor and battery clean.
Put this unit near the outlet to make it easy
for the interrupting device (plug) to reach it.
for the interrupting device (plug) to reach it.
≥ If there is dust, a scratch, or dirt on disc or
if it is warped, the following phenomena
may occur:
– Block noise in playback image
– Momentary stop of playback image
– Sound interrupted during playback, or
may occur:
– Block noise in playback image
– Momentary stop of playback image
– Sound interrupted during playback, or
abnormal sound
– Thumbnail display with shades of blue and
white
– Disc cannot correctly be recognized
– Delay between video and audio
– Delay between video and audio
≥ When recording images, this unit may avoid
the portions of disc where recording is not
possible, due to dust, scratches, etc. (It will
pause at such a portion and automatically
restart recording.)
possible, due to dust, scratches, etc. (It will
pause at such a portion and automatically
restart recording.)
When the access lamp is illuminated
(during access to the disc), do not open the
disc cover, turn off the power, or cause any
vibrations or impacts.
(during access to the disc), do not open the
disc cover, turn off the power, or cause any
vibrations or impacts.
DVD-R
≥ For optimum recording on DVD-R disc, this
≥ For optimum recording on DVD-R disc, this
unit writes control data to the disc in order to
automatically make adjustments when it is
inserted and ejected accompanying
recording. If the disc has no area for control
data to be written, recording may not be
possible. To prevent this, do not insert a
DVD-R which has been recorded on more
than 50 times.
automatically make adjustments when it is
inserted and ejected accompanying
recording. If the disc has no area for control
data to be written, recording may not be
possible. To prevent this, do not insert a
DVD-R which has been recorded on more
than 50 times.
≥ Do not insert a DVD-R recorded on this unit
that has not been finalized into a recordable
device, such as a DVD recorder. The
recorded data may be damaged.
device, such as a DVD recorder. The
recorded data may be damaged.
About the AC adaptor
About the disc
D250&300(P_PC)eng.book 161 ページ ２００６年１月２０日 金曜日 午後２時３分