Panasonic DMCLX7 User Manual

Page of 226
Application (Record)
Taking pictures according to the scene  [Scene Mode] 
- 81 -
VQT4J11
 •How to select a scene 
 
[3D Photo 
Mode]
Pictures are recorded continuously while moving the camera horizontally, 
and two pictures selected automatically are combined to make a single 3D 
picture. 
To view 3D pictures, a television that supports 3D is required (This unit will 
play back in 2D).
 
Recording procedure
Press the shutter button fully to start 
recording, and then move the camera 
horizontally from left to right in a straight 
line.
 •A guide is displayed while recording. 
 •Move the camera approximately 
10 cm (0.33 feet) within approximately 
4 seconds using the guide.
Tips for recording pictures
 •Record a stationary subject.
 •Record a picture outdoors or in other bright locations.
 •Press the shutter button halfway to fix the focus and the exposure, press 
the shutter button fully, and then pan the camera.
 •Hold the camera so that the subject is slightly to the right of the center on 
the display at the start of the recording. This makes it easier to position the 
subject in the center of the recorded picture.
Notes
 •
3D still pictures cannot be recorded by holding this camera vertically.
 •3D still pictures are recorded in MPO format (3D).
 •The zoom position is fixed to the W end.
 •The picture size is fixed to 2M [16:9].
 •ISO Sensitivity is automatically adjusted. However, ISO Sensitivity is 
increased to make the shutter speed faster.
 •Motion pictures cannot be recorded.
 •It may be impossible to record pictures under any of the conditions below. 
Even if pictures are recorded, they may not have a 3D effect or may appear 
distorted. 
-  When the subject is too dark or too bright
-  When the subject’s brightness changes
-  When the subject is moving
-  When the subject lacks contrast