Panasonic DMCFX01W User Manual
Advanced
44
VQT0V86
Taking Pictures using
Burst Mode
Burst Mode
1 Press the burst mode button to
switch the burst mode setting.
: High speed
;
: Low speed
;
: Unlimited
¢
1
;
No display: canceled
¢1 Depends on the memory size,
battery power, picture size and
quality (compression).
quality (compression).
2 Take a picture.
• Hold down the shutter button fully to
activate the burst mode.
∫ Number of pictures recorded in burst
mode
¢2 The burst speed is constant regardless
of the transfer speed of the card.
• The number of pictures indicated is when
the shutter speed is faster than 1/60 and
the flash is not activated.
the flash is not activated.
• In simple mode [
], the settings become
as follows. [
] appears on the left of the
screen. (P25)
– [
– [
ENLARGE]:
/Max. 6 pictures
– [
4
qk6q/10k15cm]/[
E-MAIL]:
/Max. 8 pictures
• When the burst mode setting is set to
Unlimited
– You can take pictures until the capacity
– You can take pictures until the capacity
of the card is full.
– The burst speed will become slower halfway.
The burst speed of a MultiMediaCard
becomes even slower than that of an SD
Memory Card. However, the exact timing of
this depends on the number of recordable
pictures and the card.
becomes even slower than that of an SD
Memory Card. However, the exact timing of
this depends on the number of recordable
pictures and the card.
• The focus is fixed when the first picture is
taken.
• When the self-timer is used, the number of
recordable pictures in burst mode is fixed to 3.
• Burst mode is not canceled when the
camera is switched off.
• When auto bracket and burst mode are set
simultaneously, auto bracket will be performed.
• The exposure and the white balance vary
depending on the burst mode setting. When
burst mode is set to [
burst mode is set to [
] or [
], they are
fixed to the values set for the first picture.
When the burst speed is set to [
When the burst speed is set to [
], they are
adjusted each time you take a picture.
• When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When burst mode is activated,
[AUDIO REC.] cannot be used.
• When the flash is activated or
[STARRY SKY] in scene mode is
selected, you can take only 1 picture.
selected, you can take only 1 picture.
Burst speed
(pictures/
second)
Number of recordable
pictures (pictures)
3
¢
2
max. 6
max. 8
2
¢
2
approx. 1.5
Depends on the
remaining capacity of the
card.
remaining capacity of the
card.
3
VQT0V86ENG.book 44 ページ ２００６年１月３０日 月曜日 午前９時４６分