Panasonic DMC-FX38 User Manual

Page of 120
59
VQT1S07
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Set the compression rate at which the pictures are to be stored.
Applicable modes:
 ·¿
Note
Refer to P114 for information about the number of recordable pictures.
For details on [REC] mode menu settings, refer to P18.
This allows you to select the aspect ratio of the pictures to suit printing or the playback 
method.
Applicable modes: 
ñ·¿
Note
The ends of the recorded pictures may be cut at printing so check before printing. (P112)
For details on [REC] mode menu settings, refer to P18.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the 
movement of the subject and brightness of the scene to minimise the jitter of the subject.
Applicable modes: 
·
[OFF]/[
]/[
]/[
]
The upper limit of the ISO sensitivity can be set.
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the 
amount of picture noise.
Note
Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
Movements may not be detected when a moving subject is small, when a moving subject is at 
the edge of the screen or when a subject has moved at the very moment when the shutter 
button was pressed fully.
To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting 
[COLOR MODE] to [NATURAL]. (P65)
A
 [QUALITY]
[A]:
Fine (when giving priority to the picture quality)
[]:
Standard (when using the standard picture quality and increasing the number of 
pictures to be recorded without changing the number of pixels)
?
 [ASPECT RATIO]
[X]:
[ASPECT RATIO] of a 4:3 TV
[Y]: [ASPECT RATIO] of a 35 mm film camera
[W]: [ASPECT RATIO] of a high-definition TV, etc.
[X]
[Y]
[W]
 [INTELLIGENT ISO]
ISOMAX
400
ISOMAX
800
ISOMAX
1600
DMC-FX38GN-VQT1S07_eng.book  59 ページ  2008年7月7日 月曜日 午後8時42分