Panasonic DMC-FX07 User Manual

Page of 128
Advanced
45
VQT0Y69
Taking Pictures using 
Auto Bracket
In this mode, 3 pictures are automatically 
recorded in the selected exposure 
compensation range each time the shutter 
button is pressed. You can select the 
picture with the desired exposure from the 
3 pictures with different exposures.
1 Press 
3 [
] several times until 
[AUTO BRACKET] appears, set 
the compensation range of the 
exposure with 
2/1.
• You can select [OFF] (0), [
d1/3 EV], 
[
d2/3 EV] or [d1 EV].
• When you do not use auto bracket, 
select [OFF] (0).
2 Press [MENU/SET] to finish.
• You can also press the shutter 
button halfway to finish.
• When setting auto bracket, the auto 
bracket icon [
] appears on the lower 
left of the screen.
• When taking pictures using auto bracket 
after setting the exposure compensation 
range, the pictures taken are based on the 
selected exposure compensation range.
When the exposure is compensated, the 
exposure compensation value appears on 
the lower left of the screen.
• The auto bracket setting is canceled if you 
turn the camera off or power save mode is 
activated.
• When setting auto bracket and burst mode 
simultaneously, auto bracket will be 
performed.
• When auto bracket is set, the auto review 
function is activated regardless of the auto 
review setting. (The picture is not 
enlarged.) You cannot set the auto review 
function in the [SETUP] menu.
• When auto bracket is activated, 
[AUDIO REC.] cannot be used. 
• The exposure may not be compensated 
with auto bracket depending on the 
brightness of the subject.
• When the flash is activated or 
[STARRY SKY] in scene mode is 
selected, you can take only 1 picture.
• If the number of recordable pictures is 2 or 
less, you cannot take pictures by setting 
auto bracket.
• The auto bracket cannot be used when 
the ISO sensitivity is set to [
]. 
(DMC-FX07)
AUTO BRACKET
SELECT
EXIT
MENU
VQT0Y69ENG.book  45 ページ  2006年6月30日 金曜日 午前11時7分