Sony MHS-TS22 Manual
22
GB
Ta
bl
bl
O
Se
ttin
g
ttin
g
Inde
Charging the camera
The camera’s battery is continuously charged whenever the camera is connected to a running
computer.
computer.
1 Press the ON/OFF (Power) button to turn off
the camera.
2 Slide the multi-connector cover knob in
the direction of the arrow as illustrated
and open the multi-connector cover.
and open the multi-connector cover.
3 Slide the USB jack knob.
The Built-in USB arm comes out as shown in the illustration.
4 Connect the camera to the computer that
is turned on.
The charge lamp lights up in orange, and charging
starts.
When the charge lamp turns off, charging is finished.
starts.
When the charge lamp turns off, charging is finished.
• The charge lamp may turn off when the temperature is
outside of the recommended operating temperature
(10°C to 30°C (50°F to 86°F)).
(10°C to 30°C (50°F to 86°F)).
• The charge icon is displayed on the LCD screen when
charging is started. However, the icon disappears after a
while.
while.
• If the battery level is low (low battery), the charge icon
may not be displayed on the LCD screen. In this case,
check if the charge lamp is lighting up.
check if the charge lamp is lighting up.
• If the charging lamp does not light correctly, reconnect
the camera to the computer.
ON/OFF (Power)
button
button
Built-in USB
arm
arm
USB jack knob
Charge
lamp
lamp
Continued
r