Panasonic AK-HC931BP User Manual
31
Control
1) Power selection: EXT, OFF, CCU
2) USER SEL:
2) USER SEL:
Functions specified by menu items
can be allocated to the switch.
can be allocated to the switch.
3) RET A/B selection: For selecting the return signal
4) Front tally selection: Front tally HIGH, LOW, OFF (VF unit)
5) Viewfinder marker
4) Front tally selection: Front tally HIGH, LOW, OFF (VF unit)
5) Viewfinder marker
selection:
Center marker, safety zone, 4:3 marker
6) Gain selection:
LOW, MID, HIGH
7) Output selection: CAM, BAR, TEST
8) White balance mode: A, B, preset
9) Shutter speed
8) White balance mode: A, B, preset
9) Shutter speed
selection:
1/100, 1/125 1/250, 1/500, 1/1000,
1/2000
1/2000
10) AWB, ABB settings
11) Menu selection
12) CALL SW
13) INCOM:
11) Menu selection
12) CALL SW
13) INCOM:
MIC ON/OFF, receive or PGM level
14) MIC setting:
MIC power, MIC gain, MIC1 selection
15) Optical filter setting: REM, LOCAL selection and LOCAL
setting
*When the CCU is connected, the selection functions for 6) to 10)
are not effective.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Specifications are subject to change without notice.
O perating temperature
range:
32F to 104F (0C to +40C)
S torage temperature
range:
–4F to 140F (–20C to +60C)
O perating ambient
humidity:
Less than 85%
Weight:
Approx. 10.7 lbs (4.85 kg)
Dimensions:
5 (W)11-1/16 (H)14-3/8 (D) inch
(excluding protrusions)
126 280 365 mm
Basic items
1) Pickup device:
2/3 million pixel ITCCD 3
2) System:
GBR pickup system
3) Color separation
optical system:
f/1.4 prism
4) Optical filters:
CC: 3200K, 4300K, 6300K, Cross
Diffusion
ND: CAP, Through, 1/4, 1/16, 1/64
5) Lens mount:
Bayonet type
6) Output standard: SMPTE 296M/274M
7) Sensitivity:
7) Sensitivity:
f/10.0, 2000 lux, 3200 K, white
reflectance 89.9%
reflectance 89.9%
8) Horizontal modulation: More than 45% (27.5 MHz)
9) S/N ratio:
9) S/N ratio:
54 dB (Y: 30 MHz)
10) Horizontal frequency: 44.955 kHz, 750-line frame
/33.716 kHz, 1125 line frame
11) Vertical frequency: 59.94 Hz, progressive
/59.94 Hz, interlace
Input/output signals
1) Mic input:
–20, –30, –40, –50, –60 dBm
(XLR 3-pin female2)
Gain selected by switch
2) INCOM:
0 dBm/600 ohms
(XLR 5-pin, female2)
(Mixing is controlled separately for
PGM1 and PGM2.)
PGM1 and PGM2.)
3) Monitor output:
HD signals = 1Vp-p, 75 ohms (BNC)
Output signals can be selected using
the monitor output selector switch.
the monitor output selector switch.
4) QTV output:
VBS signal = 1 Vp-p, 75 ohms (BNC)
5) G/L input:
1 BNC connector (tri-level SYNC)
6) AUX output:
VBS signal = 1 Vp-p, 75 ohms (BNC)
(when optional unit has been installed)
Power supply:
DC 12 V (when external power is supplied)
AC 150 V–240 V (when CCU is connected)
Power consumption:
33 W (during external power supply operation)
43 W (when CCU is connected)
DC 12 V (when external power is supplied)
AC 150 V–240 V (when CCU is connected)
Power consumption:
33 W (during external power supply operation)
43 W (when CCU is connected)
indicates safety information.
Specifications