Nikon Coolpix 995 User Manual
155
154
Connecting to a television or VCR
Connecting to an AC Adapter (optional)
1
Open the DC-in connector cover as indicated.
2
Set the Mode dial to
, and connect the AC adapter plug to the
DC-in connector.
3
Plug in the adapter.
The camera can be powered from AC electrical outlets rated at 100-
240 V 50/60Hz using the EH-21 AC adapter/battery charger (8.4V, 1.3A).
240 V 50/60Hz using the EH-21 AC adapter/battery charger (8.4V, 1.3A).
Notes: Connecting the AC adapter
• When connecting or removing the AC adapter plug, make sure that the Mode
dial is set to
.
• Use only the Nikon Accessory EH-21 AC adapter/battery charger.
• The camera and the AC adapter may become warm when plugged in for a
• The camera and the AC adapter may become warm when plugged in for a
long time. This is not a malfunction.
• When taking pictures with the AC adapter connected, make sure that the
adapter cord does not get in front of the lens, Speedlight or the flash sync
sensor.
sensor.
1
Open the Video output connector/USB connector cover as
shown.
shown.
2
Connect the video cable provided.
• Insert the black plug on the video cable into the camera's video output
connector, and connect the yellow plug to the video-in jack on the television
or VCR. Note that the Video input connector is not the same as the
connector used to connect your TV or VCR to an antenna or aerial.
or VCR. Note that the Video input connector is not the same as the
connector used to connect your TV or VCR to an antenna or aerial.
• When the Monitor is turned off, shooting (text) information will not be
displayed on the television screen.
• To prevent the camera from turning off during extended Video viewing or
recording, use the optional AC adapter.
• Auto Power Off (p. 175) for the Monitor is fixed at 30 minutes when the AC
adapter is connected. However, when the video cable is connected, the
COOLPIX995 will not turn off automatically and the video output will continue
until the camera is turned off manually.
COOLPIX995 will not turn off automatically and the video output will continue
until the camera is turned off manually.
• The Video Mode item in the SET-UP menu (p. 135) offers a choice of NTSC
and PAL standards for video output. Select a standard that matches that
used in your television set. Note that when the PAL video standard is
selected, the Monitor will turn off when the camera is connected to a video
device. While recording in Ultra HS or Movie mode (p. 99), the Monitor will
be used for display and video output will be suspended.
used in your television set. Note that when the PAL video standard is
selected, the Monitor will turn off when the camera is connected to a video
device. While recording in Ultra HS or Movie mode (p. 99), the Monitor will
be used for display and video output will be suspended.
You can connect the COOLPIX995 to a television or VCR to display
images on a TV monitor or make a recording on a VCR using the
provided video cable.
images on a TV monitor or make a recording on a VCR using the
provided video cable.
MOD
E
Video output connector
USB connector
USB connector
• The EN-EL1 rechargeable Li-ion battery can be charged with the EH-21 AC
adapter/ battery charger.
• The EN-EL1 rechargeable Li-ion battery cannot be charged when it is installed
inside the camera.
Connections
COOLPIX995 (E) 01.5.30 0:44 PM Page 154