Amana W10240880A User Manual

Page of 24
6
Cycles
NOTE: Not all cycles are available on all models.
Press the cycle selector button to select the drying cycle that 
matches the type of load you are drying. See AUTO DRY or 
TIMED DRY Cycle Settings chart.
Cycle selection button
AUTO DRY Cycles
AUTO DRY Cycles allow you to match the cycle to the load you 
are drying. See the following AUTO DRY Preset Cycle Settings 
chart. Each cycle dries certain fabrics at the recommended 
temperature. 
A sensor detects the moisture in the load and automatically 
adjusts the drying time for optimal drying.
AUTO DRY Cycles
Load Type
Temperature
Est. 
Cycle 
Time
(Minutes)
HEAVY DUTY
Heavyweight items, towels, jeans 
High
45
NORMAL
Corduroys, work clothes, sheets
Medium
35
DELICATE
Lingerie, blouses, washable 
woolens
Low
30
AUTO DRY Cycle Settings
TIMED DRY Cycles
Use TIMED DRY Cycles to select a specific amount of drying time 
and a drying temperature. Press the TEMP button to change the 
drying temperature from the default setting. The default drying 
temperature is High. 
TIMED DRY Cycles
Load Type
Temperature
Cycle Time*
(Minutes)
TIMED DRY 
Heavyweight items, 
bulky items, bedspreads, 
work clothes
High
60, 40, 20
TIMED DRY  Cycle Settings
*Reset time to complete drying, if needed.
Air Dry
Use the Air Dry temperature setting with TIMED DRY cycles for 
items that require drying without heat such as rubber, plastic, and 
heat-sensitive fabrics. This chart shows examples of items that 
can be dried using Air Dry.
Type of Load
Est. 
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - shower curtains, tablecloths
20 - 30
Rubber-backed rugs
40 - 50
Olefin, polypropylene, sheer nylon
10 - 20
*Reset time to complete drying, if needed.
When using Air Only
Check that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: AUTO DRY Cycles are not available when using the Air 
Only setting.
Additional Features
Cycle Signal 
The Cycle Signal produces an audible sound when 
the drying cycle is finished. Press CYCLE SIGNAL 
to turn On or Off at any time before or during a 
cycle.
Changing Cycles and  Settings
You can change AUTO DRY Cycles, TIMED DRY Cycles, and the 
drying temperature on TIMED DRY Cycles at any time before 
pressing START/PAUSE. 
Three short tones sound if an unavailable combination is 
selected. The last selection will not be accepted.
Changing Cycles after starting dryer
1. Press the POWER button. This ends the current cycle and 
turns the dryer OFF.
2. Press the POWER button again or press the cycle selector to 
turn on the dryer.
3. Select the desired cycle and options.
4. Press and hold START/PAUSE. The dryer starts at the 
beginning of the new cycle.
Changing Drying Temperature
You can change the drying temperature on Timed Dry cycles at 
any time by pressing the TEMP button until the desired drying 
temperature is lit.