Zanussi TCS 603 LT User Manual

Page of 13
8
Use
The control panel
1 Programme Chart
The programme chart provides a summary of all the
programmes available and the corresponding drying
times.
2 Door opening and programme
interruption button 
To open door, press this button: the programme in
progress is interrupted.
3 Low Temperature button 
Press this button to reduce the temperature when
drying particularly delicate cotton or linen items.
4 Start button 
After selecting the drying time, press start button: the
appliance will start drying.
If the door is opened during  drying, the
programme is interrupted. It will be resumed by
pressing the button again.
5 “Water container full” light 
This light lights up when the water container is full or
when it has been inserted incorrectly.
6 Drying Time Selector Dial 
The selector dial incorporates two drying cycles, one
of up to 150 minutes at a high temperature  for cotton
and linen, and one of up to 100 minutes at a low
temperature for synthetic fabrics.
To set the machine to the selected time, turn the dial
clockwise until the time you want coincides exactly
with the pointer.
NEVER attempt to turn the dial in an anticlockwise
direction.
The drying time depends on:
- the speed of the last spin
- the desired degree of drying
- the type of laundry
- the size of the load.
Cooling phase  
When selecting the drying time, it should be
remembered that it includes a 10 minute cooling
phase. The heating is automatically cut off and the
laundry is cooled.
The position 
on the dial can be selected to
refresh jumpers, clothes, etc.
7 Mains-On Light
This lights up when the machine starts operating and
goes out at the end of the programme or by opening
the door.
kg  2.5
kg  1
     650
65' - 75'
30' - 40'
kg  5
kg  2,5
800 / 900
 85' -105'
45' - 60'
1000 / 1200
  75' - 100'
 40' -  55'
800 / 900
110' - 130'
 60' -  75'
1000 / 1200
100' - 125'
 55' -  70'
1
2 3
4
5
6
7
125994260•TCS603LT•gb  12-12-2000  8:38  Pagina 8