JVC GR-FXM39 User Manual

Page of 28
1
INSTRUCTIONS
ENGLISH
LYT1060-001B
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
• Available when the Power Switch 
@
 is set to “
” or “
” while pressing down the Lock Button 
!
located on the switch.
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• “DEMO MODE” remains “ON” even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch 
@
 to “
” and press the MENU Wheel 
1
 in
while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel 
1
 to select “OFF” and press it.
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (
 pg. 3, 4) to ensure safe use of this product.
COMPACT VHS CAMCORDER
GR-SXM49
GR-FXM393
GR-FXM39
GR-SX25
GR-FX15
VHS
PAL
625
COPYRIGHT©
 2002 VICTOR COMPANY OF JAPAN, LTD
S-VHS is compatible with
GR-SXM49/SX25 only
EX
Printed in Malaysia
0902-MK-UN-PJ
 01 GR-SXM49EG_EN (EX)
02.10.17, 20:17
1