Sony CDX-C8050X User Manual
22
2
1
3
Selecting the listening
position
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
centre of the sound field no matter where you
sit in the car.
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
centre of the sound field no matter where you
sit in the car.
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
CD, or MD).
2
Press (SOUND) repeatedly until “POS”
appears.
appears.
3
Press either side of (SEEK/AMS) to select
the desired listening position.
Each time you press (SEEK/AMS), the item
changes as follows:
the desired listening position.
Each time you press (SEEK/AMS), the item
changes as follows:
All y Front y Front-R y Front-L y Rear y
off y All
To cancel the POS mode, select “off.”
After three seconds, the display returns to
the normal playback mode.
After three seconds, the display returns to
the normal playback mode.
Adjusting the equalizer curve
1
Press (MENU).
2
Press either side of (DISC/PRST)
repeatedly until “EQ Tune” appears,
then press (ENTER).
repeatedly until “EQ Tune” appears,
then press (ENTER).
3
Press either side of (SEEK/AMS) to select
the desired equalizer curve, then press
(ENTER).
Each time you press (SEEK/AMS), the item
changes as follows:
the desired equalizer curve, then press
(ENTER).
Each time you press (SEEK/AMS), the item
changes as follows:
Rock y Vocal y Groove y Techno y Custom
y off y Rock
y off y Rock
4
Select the desired frequency and level.
1
Press either side of (SEEK/AMS) to
select the desired frequency.
select the desired frequency.
Each time you press (SEEK/AMS), the
frequency changes as follows:
frequency changes as follows:
62 Hz y 157 Hz y 396 Hz y 1.0kHz y
2.5kHz y 6.3kHz y 16.0kHz
2
Press either side of (DISC/PRST) to
adjust the desired volume level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
adjust the desired volume level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
To restore the factory-set equalizer curve,
press (ENTER) for two seconds.
press (ENTER) for two seconds.
5
Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
When the effect setting is complete, the
normal playback mode appears.
Display
window
POS
All
POS
window
POS
All
POS
Front
POS
Front-R
POS
Front-L
POS
Rear
POS
off
Front-R
POS
Front-L
POS
Rear
POS
off
Centre of sound
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
Cancel
01US05RAD-U.p65
1/20/00, 10:13 PM
22