Energizer FALCON User Manual
11
Figure 2.2.2 TIMER MODE Entry Menu
NOTE!! The unit automatically resets to MANUAL Mode after the data transfer. If
you uncheck the “ENABLE box” and choose “APPLY CHANGES”, the unit will
revert to Manual.
2.3 ERASE RECORDER
The RECORDER data memory MUST always be erased after each use. The
unit will not operate unless you have erased previous recordings, after
complete and proper data transfer off all recordings.
Depending on the unit, i.e., how much memory it has, the erasure may take from
1 to 16 minutes to finish.
you uncheck the “ENABLE box” and choose “APPLY CHANGES”, the unit will
revert to Manual.
2.3 ERASE RECORDER
The RECORDER data memory MUST always be erased after each use. The
unit will not operate unless you have erased previous recordings, after
complete and proper data transfer off all recordings.
Depending on the unit, i.e., how much memory it has, the erasure may take from
1 to 16 minutes to finish.