Energizer FALCON User Manual
43
SECTION 7
"MONO8" RECORDER
Figure 7-1 MONO8
The MONO8 audio recorder captures stereo for 10 hours or mono for 20 hours. Note
that the pager is fully functional with the exception of the vibrator function. The MONO8
has an Officer Safety Transmitter (OSRFT) option which transmits the audio
continuously for up to 6 + hours while recording with the “L91” Lithium battery. When the
MONO8 is not transmitting, an ordinary Alkaline “AA” will last for 10+ hours. The
MONO8 uses the USB port of the PC for data archive making it a very transportable unit.
Refer to Figure 7-1 MONO8
The MONO8A is the latest model it has more memory and records 13 stereo hours.
BATTERY
NOTE, a battery should be left in the unit while on the shelf to keep the pager
function settings. This should not be confused with the recorder settings, which are
kept even without a battery. A fresh battery must be installed on every new recording.
DOWNLOAD CABLE / GUIDE PIN
The Download / Control cable plugs in just to the inside of the coil spring. The "key"
Guide Pin is towards the outside (short) end. Please be gentle, and insert and pull the
cable straight out.
RCD
The "ON" and "OFF" switches are momentary, and should be held for about 1/2 second.
Note the red LED will follow the audio. NOTE, please do not exert excessive force
when depressing the switch.
that the pager is fully functional with the exception of the vibrator function. The MONO8
has an Officer Safety Transmitter (OSRFT) option which transmits the audio
continuously for up to 6 + hours while recording with the “L91” Lithium battery. When the
MONO8 is not transmitting, an ordinary Alkaline “AA” will last for 10+ hours. The
MONO8 uses the USB port of the PC for data archive making it a very transportable unit.
Refer to Figure 7-1 MONO8
The MONO8A is the latest model it has more memory and records 13 stereo hours.
BATTERY
NOTE, a battery should be left in the unit while on the shelf to keep the pager
function settings. This should not be confused with the recorder settings, which are
kept even without a battery. A fresh battery must be installed on every new recording.
DOWNLOAD CABLE / GUIDE PIN
The Download / Control cable plugs in just to the inside of the coil spring. The "key"
Guide Pin is towards the outside (short) end. Please be gentle, and insert and pull the
cable straight out.
RCD
The "ON" and "OFF" switches are momentary, and should be held for about 1/2 second.
Note the red LED will follow the audio. NOTE, please do not exert excessive force
when depressing the switch.