Sharp MD-MS702 User Manual

●

The continuous recording time is for analog inputs when the volume level is set to
“VOL 0”. 

●

The continuous play time shows the value when the volume level is set to “VOL 15”.

●

The above values are the standard values when the unit is charged and used at an
ambient temperature of 68˚F (20

°

C).

●

The operating time when using alkaline batteries may be different, depending on the
type and manufacturer of the batteries, and on the operating temperature.

Input sensitivity:
                            
                             
                             
               
        

Output level:
             

    
Dimensions: 

Width:   3-7/16" (87.0 mm)

      

Height:   1-3/16" (29.4 mm)

      

Depth:    3-7/32" (81.5 mm)

Weight:      

0.49 lbs. (219 g) with rechargeable battery

Input jack:      

Line/optical digital, microphone (powered by the main unit)

Output jack:     

Headphones (impedance: 19 ohms)/
remote control unit

■

Type:        

Portable MiniDisc recorder

Signal readout:           

Non-contact, 3-beam semi-conductor laser pick-up

Audio channels:           

Stereo 2 channels/monaural (long-play mode) 1 channel

Frequency response:       20 – 20,000 Hz (

±

 3 dB)

Rotation speed:           

Approx. 400 – 900 rpm

ACIRC (Advanced Cross Interleave Reed-Solomon Code)

Coding:      

ATRAC (Adaptive TRansformed Acoustic Coding), 24-bit 
computed type

Recording method:          Magnetic modulation overwrite method
Sampling frequency:        44.1 kHz (32 kHz and 48 kHz signals are converted to

44.1 kHz, and then recorded.)

Wow and flutter:          

Unmeasurable (less than 

±

0.001% W. peak)

Recording level

Reference input level

Input impedance

  MIC H

0.25 mV

10 k ohms

 MIC L

 2.5 mV

10 k ohms

  LINE

 100 mV

20 k ohms

Specified

output

Maximum

output level

Load

impedance

Headphones

—

10 mW + 10 mW

32  ohms

LINE 

300 mV

(-12dB)

—

50 k ohms

MD-MS702