Fluke 116 Data Sheet

Page of 20
 
Digital Multimeters
 
 
International Electrical Symbols
   
  
International Electrical Symbols 
Table 1 lists the international symbols that appear in this document and on the Meter. 
Table 1. Electrical Symbols 
Symbol Description Symbol 
Description 
B
 
AC (Alternating Current) 
I
 
Fuse 
F
 
DC (Direct Current) 
T
 
Double Insulated 
X
 
Hazardous voltage 
W
 
Important Information; Refer to manual 
N
 
Battery (Low battery when shown on the 
display.) 
J
 
Earth ground 
~
 
Do not dispose of this product as unsorted municipal waste. Contact Fluke or a qualified recycler for 
disposal. 
Specifications 
Accuracy is specified for 1 year after calibration at operating temperatures of 18 
°
C to 28 
°
C, with relative humidity at 0 % to 90 %. Extended 
specifcifications are available at www.fluke.com. 
General Specifications 
Maximum voltage between any  
terminal and earth ground 
................................... 600 V 
Surge Protection................................................... 6 kV peak per IEC 61010-1 600V CAT III,  
Pollution Degree 2 
W
 Fuse for A input (115 & 117 only):.................. 11 A, 1000 V FAST 17 kA Fuse (Fluke PN 803293) 
Display ................................................................... Digital: 6,000 counts, updates 4/sec 
Bar Graph: 33 segments, updates 32/sec  
Temperature .......................................................... Operating: -10 °C to +50 °C 
Storage: -40 °C to +60 °C 
Temperature Coefficient ...................................... 0.1 x (specified accuracy)/
°
C (<18 
°
C or >28 
°
C) 
Operating Altitude ................................................ 2,000 meters 
Battery ................................................................... 9 Volt Alkaline, NEDA 1604A / IEC 6LR61 
Battery Life ............................................................ Alkaline: 400 hours typical, without backlight  
Safety Compliances.............................................. Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 6101B 
(2003) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution 
Degree 2, EMC EN61326-1 
Certifications......................................................... UL, P, CSA, TÜV, ; (N10140), VDE 
IP Rating (dust and water protection)................. IP42