Escali 25 Lb User Manual

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

   

 
Please read the following operation information to ensure the 
proper function of your new scale. 

 

1) On the right side, move the switch to select the units (g/oz) 
2) On the left side, press the “ON” soft-touch button 
3) Place item slowly on the platform 

 

*Please Note: If the scale does not return to “0” g/oz after removing 
the item from the platform, simply press the “ON” button again.  This 
will reset the scale to “0” g/oz. 

This feature allows you to obtain the exact weight of an item in a 
container, by subtracting the weight of the container. 
1) On the right side, select measuring units (g/oz) 
2) On the left side, press the “ON” button 
3) Place the container, without the item, slowly on the platform  
4) Press the “ON” button again.  The weight of the container will be 
removed and the display will reset to “0”  
5) Slowly add the item to the container.  The display will show the 
weight of the item only

 

How to clear “Tare” feature: 

1) Remove all items from the platform.   
2) Press the “OFF” button 
3) Press the “ON” button 
Now the scale is reset to “0” and the weight of all items on the 
platform will be displayed. 

 

This unit does not display decimal points, instead it uses oz.  
Example: The display will read 1LB 12oz1, which is 1lb 12.1oz

 

 
 

 

1) Make sure your scale is at room temperature and on a stable 
horizontal surface free of vibration. 
2) This scale is not waterproof.  Do not expose to moisture. 
3) As this scale is a precision instrument, it must be handled with 
extreme care. Avoid rough treatment, shaking and vibration. 
4) Do not disassemble this scale or the warranty will be void. 
5) The display value may be affected by electromagnetic 
disturbances such as operating near a radio.  If this occurs, move the 
device that is causing the disturbance and turn the scale off and 
restart.  

 
 

Weighing items over the maximum weight capacity will cause an “EE” 
error to display.  Immediately remove overweight items to avoid 
causing damage to your scale.

   

 

Insert the adapter’s plug into the matching outlet holes.  Firmly push 
and adjust the plug until it is fully inserted into the scale.    

 

 

 

Warning – To prevent damage to your scale, use only an Escali 
adapter or your warranty will be void 
 
Escali’s liability is limited to two (2) times the cost of the product 
 
 

© Copyright 

Escali LLC, 2003

 

 

 

 

TM

 

User Manual 

 

 
 

25 Lb / 12 Kg 

 

Digital Scale

 

 

 
 

 

 

www.

.com 

 

Before the scale is turned ON, you may select the default weighing 
units by moving the switch (located on the right side of the scale) to g 
or oz.  Once the scale is activated, the display will show the default-
weighing units.  You may switch to the other weighing units during 
use by moving the switch. 

 

How to reset the scale: 

If a series of dotted lines appears on the display and/or the scale fails 
to weigh items placed on the platform:   
1) Remove the item from the platform and press the “OFF” button   
3) Press the “ON” button again; your scale is now reset to “0”

1) Before activating the scale, lift the built-in holder cover* 
2) On the left side, press the “ON” button 
3) Place and secure item slowly into the special holder 
*Please note - If the scale is activated before lifting the built-in holder 
cover, the scale may not operate.  If this occurs, simply reset the unit 
by pressing the “OFF” button and return to step 1.

 

Replace the battery when the LCD display reads “LO”.  
1) Remove the battery door 
2) Install the 9-volt battery connections 
3) Replace the battery door

 

Power Source: 

9-volt battery or 110V AC Adapter

 

:  8" x 8" x 3" (20.3cm x 20.3cm x 7.6cm)

 

 

0.1 oz / 2 gr up to 2 Lb / 1 Kg,  

0.5 oz / 5 gr over 2 Lb / 1 Kg

25 Lb / 12 Kg

Weight Modes: 

Kg/gm and lb/oz

 

Auto Shut Off: 

Turns off after 3-4 minutes of non-use.

 

 

Warranty: 

Manufacturer’s five (5) year warranty, see 

www.escali.com for full details.