Sharp R520_CJ16_MM_111009_F4 User Manual

Page of 169
125
1.
At the Security sub-menu, select Lock Phone
The following Device Lock Mode options appear in the 
display: 
• Lock — Locks the phone immediately. (The phone stays locked 
until you enter the lock code.) 
• Unlock — Unlocks the phone. 
• On Power Up — The phone locks automatically the next time your 
phone is powered on. (The phone stays locked until you enter the 
lock code.) 
2.
Select the Device Lock Mode option of your choice. 
Change Lock
The default lock code for your phone is generally the last four 
digits of your phone number. It is advisable to change the default 
lock code to a secret code for security purposes. 
1.
At the Security sub-menu, select Change Lock. You’re 
prompted to enter the new lock code. 
2.
Enter the new lock code. You’re prompted to re-enter the 
new lock code for verification. 
3.
Enter the new lock code again. Your changes are stored. 
Note: Your phone does not allow you to view the lock code for obvious 
security reasons. If you change the lock code, be sure to write down or 
memorize the new code. 
Emergency #
Your phone provides the option of storing three emergency 
numbers. Each number can be up to 32 digits in length. All 
emergency numbers can be manually called at any time, even 
when your phone is locked or restricted. This can be a useful 
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial 
this number any time, even when the phone is locked or restricted. If 
you call 911 an audible tone is heard and an Emergency prompt 
appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, 
and user settings necessary to complete a call from your 
wireless phone, a connection cannot always be guaranteed. 
Therefore, emergency calling may not be available on all 
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate 
signal strength before placing a call.