Freestyle FS80962 User Manual

TRIM

TIDE 3.0-03

8. It is advisable to have your watch
    pressure tested annually and to
    re-furbish your watch every 2-3

years to extend the life of the watch.

1. Never Pull out the crown or operate
    the pushers/buttons under water.

3. If your watch is exposed to
    saltwater it is very important to
    wash it thoroughly under tap water

    and wipe dry with a soft cloth.
    Keep it clean!

7. Never try to remove the caseback,

leave this to a certified watch repair

    technician or Freestyle service
    center. This will help in preventing
    water leakage from improper

    battery replacement.

4. Sever impacts or drops may affect
    your watches water resistance

    and performance.

6. Avoid exposing your watch to
    chemicals, soaps or solvents as
    they deteriorate the water resist

    seals in your watch.

2. Make sure your crown is returned
    to the original position before you
    expose your watch to water.

5. Avoid exposing your Freestyle
    watch to extreme temperatures

    such as in a hot shower, Jacuzzi,

    sauna or hot tub. The combination
    of extreme heat and water may
    cause your watch to lose some of

    its water resistance.

the product, including but not limited

responsibility.  This warranty applies

Freestyle U.S.A. warrants, to the

original purchaser, that its watches

are free from defects in materials

and workmanship for the lifetime

of the watch (under normal use)

from date of original purchase.

The following are not covered under

warranty: battery, strap/bracelet/

band and crystal.

Accidental breakage or damage

due to normal wear or misuse of

to the mathematical accuracy of

the product, is not covered under

this warranty. Some states do not

allow limitations on how long an

implied warranty lasts, or the

exclusions of or limitations on

consequential damages, so the

above limitation may not apply to

you. This warranty gives you

specific legal rights, and you may

have other rights, which vary from

state to state.
Under this warranty FREESTYLE

will make any necessary repairs, if

applicable, at no cost to you the

consumer. Any repair needed that

is not under warranty will be at the

cost of you the consumer.  Proof

of purchase and / or original receipt

it needed to validate your warranty.
Your warranty is voided by any

servicing out by a non-authorized

agent. Any other form of guarantee

to you by the retailer is his / her

to watches purchased in the United

States.  For watches purchased

outside the United States, please

contact you authorized

FREESTYLE dealer for warranty

information.

Please send to the address below

and include the following (w/ the

form included on either this page

or the flipside)

A copy of your original sales
receipt

Your printed name, address,

phone number and a brief

description of the problem.

A Check, Money Order payable

to Freestyle USA in the amount

of $8.50 for processing and

handling.  If using a Credit Card,

be sure to include card number

and expiration date on included

form.

Attn: Individual Returns

47-50 33rd Street

Long Island City, NY 11101

Should the warranty on your watch

no longer be valid or found to be

voided, please see the enclosed

mailing form (on this page or

flipside) for replacement costs per

item. Please do not include any

special watchband or any other

items of personal value in your

shipment. Allow 30 days for

processing and the return of your

serviced watch.

www.freestyleusa.com

1-888-222-5230 ext.502

Attn: Individual Returns

47-50 33rd Street

Long Island City, NY 11101

visit our site

Battery

$   4.00

Case

   10.00

Bezel

     6.00

Band(Polyurethane)

   12.00

Band(Leather)

   12.00

Band(Metal)

   20.00

Band(Nylon)

     7.00

Processing and handling     8.50
Total

$

Check or Money Order

Master Card

Card #

Exp Date

Visa

Name

Adress

Phone #

Signature

www.freestyleusa.com

1-888-222-5230 ext.502

,a tune will be emitted and the 

backlight will flash; if REPEAT is 

selected, the TIMER repeats its 

countdown with the rep number 

updated. If the TIMER reset time is 

less than 30 seconds, a beep will 

be emitted. Otherwise, a tune will 

be emitted and the backlight will 

flash.

1. Press S3 button to select HEAT 

TIMER mode.

2. Press S4 button, the “SET” 

message appears and the Minute 

digits blink on the display.

3. Press S1 button to increase the 

digits by five units, or press S2 

button to decrease the digits by five 

units. Holding down either button 

will speed up the process.

4. After finished making all the 

settings, press S4 button to confirm 

the settings.

NOTE: The HEAT TIMER can count up 

to a maximum time of 35.00 

(35minutes).

1. Press S3 button to select HEAT 

TIMER mode.

2. Press S1 button to start a 

countdown.

3. To stop counting, press S2 button 

once. Press S1 button to resume 

from where it left off.

4. To reset the HEAT TIMER, press S2 

button once to stop counting and 

then press S2 button again.

5. Upon completion of a countdown, 

a tune will be emitted and the 

backlight will flash.

NOTE: The HEAT TIMER is 

independent of the TIMER. Both may 

be running at the same time.

1. Press S3 button to select ALARM 

mode. 

2. Press S4 button, the “SET” 

message appears and the alarm 

entry to set blinks on the display.

3. Press S1 button or S2 button to 

toggle between ALARM 1 and 

ALARM 2.

4. Press S3 button, the Hour digits 

(including AM/PM for 12-hour 

format) will blink.

5. Press S1 button to increase the 

digits by one unit, or press S2 

button to decrease the digits by one 

unit. Holding down either button 

will speed up the process.

5. Press S3 button, the Minute digits 

will blink.

6. Press S1 button or S2 button to set 

the Minute digits.

7. Press S3 button, the alarm 

frequency will blink.

8. Press S1 button or S2 button to 

cycle forward or backward 

respectively the alarm frequency 

to be selected (DAILY, WEKDAYS, 

WEEKENDS, day of the week and

WKLY).

9. After finished making all the 

settings, press S4 button to confirm 

the settings.

NOTE: The ALARM TIME displayed is 

in the same Time Format as the 

primary time.

NOTE: A tune will go off and the 

backlight will flash for 20 seconds at 

the designated time when the ALARM 

is activated.

A tune will go off by the hour if the 

Hourly Chime function is activated and 

the same will happen at the designated 

time when the ALARM is activated. To 

stop the tune, press any button.

Press S5 button to turn on the 

backlight for three seconds.