Panasonic AJ-D750P User Manual
Setup menus
USER menu
<OPERATION>
Item
Setting
No.
Superimposed
No.
Superimposed
100 S E A R C H 0000
ENA
0001
display
DIAL
KEY
101 SHTL MAX
0000
×
16
0001
×
32
0002
×
60
102
FF. REW
0000
×
32
MAX
0001
×
60
0002
×
100
103 AUDIO
0000
OFF
MUTE
0001
ON
104
REF
0000
OFF
ALARM
0001
ON
105 AUTO EE
0000
S/F/R
SEL
0001
STOP
0002
BLACK
106
PLAY
DELAY
0000
0015
0
15
Description
This selects the direct search dial operation.
0:
For direct search dial operations.
1: Operation is not transferred to the search mode unless
the search button is pressed.
This sets the maximum speed for shuttle operations.
0: 16
0: 16
×
normal speed
1: 32
×
normal speed
2: 60
×
normal speed
<Note>
During DV format, the maximum speed is 32
During DV format, the maximum speed is 32
×
normal speed
even when 60X is selected.
This sets the maximum speed for FF and REW operations.
0: 32
0: 32
×
normal speed
1: 60
×
normal speed
2: 100
×
normal speed
<Note>
During DV format, the maximum speed is 32
×
normal speed
regardless of this setting.
This sets the status until the audio signal is output when
operation switches from the stop or search modes to the play
mode.
0:
mode.
0:
The time until the audio is output is shortened.
1:
The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
0: Warning is not given.
1:
0: Warning is not given.
1:
Warning is given by the flashing STOP lamp.
This selects the VTR mode in which the EE status is
established when the TAPE/EE switch is set to EE.
0:
established when the TAPE/EE switch is set to EE.
0:
EE status is established in the STOP, FF or REW mode.
However, EE status is always established in EJECT mode
regardless of the TAPE/EE switch setting.
However, EE status is always established in EJECT mode
regardless of the TAPE/EE switch setting.
1:
EE status is established only in the stop mode. However,
EE status is always established in EJECT mode regard-
EE status is always established in EJECT mode regard-
less of the TAPE/EE switch setting.
2:
EE status is established only in the stop mode. However,
depending on TAPE/EE switch setting EJECT mode is as
follows:
TAPE/EE switch EE:
follows:
TAPE/EE switch EE:
EE status
TAPE/EE switch TAPE: BLACK status for video
MUTE status for audio
This set the play delay time in frame increments.
The underline on
the setting item
denotes the initial setting.
- 4 7 -
display