Panasonic AJ-D750P User Manual
Setup menus
USER menu
<VIDEO>
Item Setting
No.
Superimposed
No.
Superimposed
display
600 P
B
/ P
R
IN LV
601 INT BB
SIG
0000
0001
0001
0000
0001
0001
0000
0001
0001
0000
0001
0001
0000
0001
0001
0000
0001
0001
0000
0001
0001
0000
0001
0002
0001
0002
0000
0001
0000
0001
0001
0000
0001
0001
0000
0001
0001
display
M
II
B-CAM
OFF
BB
602 INPUT
C KILL
603 OUT
VSYNC
604 V-MUTE
SEL
605 CC (F1)
BLANK
606 CC (F2)
BLANK
607 CF ID
SEL
608 FREEZE
SEL
609 IN FRM
DET
610 OUT C
KILL
611 EDH
B/W
AUTO
N-VF
VF
N-MUTE
LOW RF
LOW RF
BLANK
THRU
BLANK
THRU
OFF
ON
AUTO
FIELD
FRAME
FORCED
AUTO
B/W
COLOR
OFF
ON
Description
This selects the component input signal level.
0: Mll level.
0: Mll level.
1: cam level.
This selects whether to generate the internal black burst
signal.
0: Signal is not generated.
signal.
0: Signal is not generated.
1: Signal is generated.
This selects color killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.
video output in order to align the video output phase with the
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
This selects whether the video output signals are to be muted
when the LOW RF or servo lock release condition occurs
during playback.
0: No muting. (Freeze)
when the LOW RF or servo lock release condition occurs
during playback.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed capture signal in the
first field.
0: Forced blanking performed.
first field.
0: Forced blanking performed.
1: Blanking not performed.
This selects ON or OFF for the closed capture signal in the
second field.
0: Forced blanking performed.
second field.
0: Forced blanking performed.
1: Blanking not performed.
This selects whether to disable the CF ID in the component
and SIG PB OUT.
0: ID is not added.
and SIG PB OUT.
0: ID is not added.
1: ID is forcibly added.
2: ID is added when the CF lamp is lighted.
This selects the freeze mode for still pictures.
0: Field freeze.
0: Field freeze.
1: Frame freeze.
<Note>
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
is established with the slow setting.
This selects the conditions under which frame detection is to
be performed when signals are input.
0: Frame detection is performed at all times.
be performed when signals are input.
0: Frame detection is performed at all times.
1: Frame detection is prohibited only when non-standard
signals are input.
This selects chroma color killer processing for the video
output signals.
0: The signals are forcibly processed as B/W signals.
output signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
This is not displayed when the optional serial interface board
has not been installed.
The underline on the setting item denotes the initial setting.
- 54 -