Panasonic AJ-D750P User Manual

716

 REC CUE

717 

SCALE

DISP

718

 DV

OUTPUT

719  PB FADE

720

EMBEDDED

AUD

0000
0001
0002
0003

0000
0001

0000
0001
0002

0000
0001
0002

0000
0001

CUE

CH1
CH2

CH1+2

FULL

FINE

ST1
ST2

ST1+2

AUTO

CUT

FADE

OFF

ON

This selects the input signal recorded in CUE.

0: CUE IN

1: Audio CH1 input

2: Audio CH2 input
3:

Audio CH1 and CH2 MIX signal

This selects the level meter scale.

0: Full scale.

1: Fine scale.

This selects the AUDIO CH1 and CH2 output signals during

DV format playback.

0: The CH1 track signals are output to CH1 and the CH2

track signals to CH2.

1: The CH3 track signals are output to CH1 and the CH4

track signals to CH2.

2: The mixed CH1 and CH3 track signals are output to CH1

and the mixed CH2 and CH4 track signals to CH2.

<Note>
This item setting is valid only when the tape recorded on the
four channels of the DV format is played back.

This selects the processing method for the audio edit points

(IN point, OUT point) during playback.
0:

According to the status during recording.

1: Forced CUT

2: Forced FADE

This selects whether to superimpose the audio data onto the
serial output.
0:

Data is not superimposed.

1: Data is superimposed.

<Note>
This item is valid when the optional serial interface board has
been installed.

The underline on the setting item denotes the initial setting.

- 5 7 -