Konica Minolta VIVID 700 User Manual

104

File
Menu

File – Import – Digitizer – One Scan (When VIVID 700 is Selected)

•  If the color and range images are not scanned at 

the same time, clicking the [Read] button will 
capture a color image and display it.

•  To restart scan, repeat steps 2 to 4.

Scan will start, and both color and range im-
ages will be displayed.

The [File-Import-Digitizer-One Scan-Convert] 
dialog box will appear.

•  Select the desired rate from “1/1”, “1/4”, “1/9”, 

“1/16” and “No polygon” by selecting from the 
[Reduction Rate] pull-down menu.

•  If you want to generate points to fill in holes caused 

by missing data, set the [File Holes] setting to “On”.

•  The [Remove] pull-down menu lets you select 

which points to remove from the imported data.

   You can set this to any of the following: “None”, 

“Boundary(B.)”, “5deg. & B.”, “10deg. & B.”, 
“15deg. & B.”, or “20deg. & B.”

•  If you want to filter the imported data, select the ap-

propriate parameter from the [Filter] pull-down menu.

•  To save the raw scan data (.cam) when importing 

data, check the [Save camera data] checkbox.

The scanned image will be displayed. The 
names of the imported elements will also 
appear in the element list, indicating that the 
elements have been selected (highlighted).

•  The loaded data will be ready to be displayed in 

all windows. It will be displayed in the active 
window and the windows for which all the ele-
ments are set to be displayed.

•  When the data is loaded for the first time after 

the software is started, it will be fully framed in 
all the windows including those that are hidden 
automatically.

•  If the [Save camera data] checkbox was checked 

at step 7, the [Remote-Save] dialog box will ap-
pear

q

 Enter the desired file name.

w

 Click the [Save] button.