Roland TU-60 User Manual
13
Pull out material so that it is perpendicular to the paper
tube.
tube.
1
To prevent the pulled-out material from becoming
crooked, secure with tape at the two edges and center, as
shown in the figure.
crooked, secure with tape at the two edges and center, as
shown in the figure.
2
Backward Take-up (BACKWARD)
The printed surface is moved to the inner side and taken up
Securing the Material in Place
Forward Take-up (FORWARD)
The printed surface is moved to the outer side and taken up
Front
Pull out the material and ensure a certain amount of slack,
as shown in the figure. Move the sheet loading lever to
secure the material in place.
as shown in the figure. Move the sheet loading lever to
secure the material in place.
3
Move the [MANUAL] switch to the [FORWARD]
setting and take up one turn's worth of material.
After take-up, maintain slack as shown in the figure to keep
the material from being drawn taut by take-up.
setting and take up one turn's worth of material.
After take-up, maintain slack as shown in the figure to keep
the material from being drawn taut by take-up.
4
Front
Pull out material so that it is perpendicular to the paper
tube.
tube.
1
To prevent the pulled-out material from becoming
crooked, secure with tape at the two edges and center, as
shown in the figure.
crooked, secure with tape at the two edges and center, as
shown in the figure.
2
Front <---