3com 09-1632-000 User Manual
16
C
ONFIGURING
Y
OUR
O
FFICE
C
ONNECT
NETB
UILDER
10 B
RIDGE
/R
OUTER
7 Logically assign the two ISDN paths to port 4.
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PORT PAths link.
b In the start field, click the arrow and choose 4.
c In the PAths field, enter 2.1, 2.2.
d Click Apply.
8 Enable all paths on port 4.
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH CONTrol link.
b In the start field, click the arrow and choose 2.1
c In the end field, click the arrow and choose 3.
d In the CONTrol field, click the arrow and choose
Enabled.
e Click Apply.
9 If your line speed requirements are different than the
default (64 Kbps), you need to modify your path baud rate
configuration.
configuration.
a In the Dial On Demand ISDN Setup section of the
navigation frame, click the PATH BAud link.
b In the start field, click the arrow and choose 3.
c In the BAud field, enter your path baud rate. For
example, enter:
128
d Click Apply.
Configuring ISDN (Outside North America)
To configure Office A outside North America, follow these
steps:
steps:
1 Configure ISDN Dial on Demand.
Within IP Routing Configuration, set the primary and
secondary phone numbers as provided by your
telecommunications carrier for the ISDN paths.
secondary phone numbers as provided by your
telecommunications carrier for the ISDN paths.
a In the Dial on Demand ISDN Setup section of the
navigation frame, click the PATH LocalDialNo link.
OC10.book Page 16 Thursday, May 13, 1999 2:33 PM