Niles Audio LZR800 User Manual

ALL OFF

button

turns your entire

system off.

Individual 

ON

/

OFF

but-

tons for each pair

of speakers.

Remote Controlled Speaker Selection System

CONTINUED  OTHER SIDE 

RSL- 6 REMOTE HIGH DEFINITION SPEAKER SELECTION SYSTEM

ALL ON

ALL OFF

1

2

3

4

5

6

The RSL-6 is a Infrared Remote
Controlled Speaker Selection
System for up to six pairs of
speakers. The supplied remote
control enables you to select
any pair, any combination
of pairs, or all six  pairs of
speakers at once. You don’t have
to worry about overloading your
amplifier. The RSL-6 has a programmable
microprocessor that constantly monitors
which speakers are playing and selects exact-
ly the right amount of protection for your
amplifier.

The slim, elegant remote con-
trol (included) allows you to
completely control which
speakers are playing. Each pair
of speakers has its own 

ON

/

OFF

button. In addition, a program-
mable 

ALL ON

button (you

select which rooms will turn
on) and an 

ALL OFF

button

allow you to conveniently stop
or start your music with one
touch!

The brain of the RSL-6 is an eight
bit modified Harvard Architec-
ture Microcontroller. The micro-
controller is programmed to
remember the impedance of
each of your speaker pairs and
your amplifier’s ideal load. It
constantly monitors how many
speaker pairs are playing (and
which pairs), calculates the
exact amount of impedance
protection necessary, and pro-
vides the proper amount of pro-
tection for your amplifier.

Red LED’s indicate when a pair
of speakers is on. 72 pre-print-
ed room labels are included for
easy identification.

®

Using optional X-10 wireless
remotes and controllers you
can control the RSL-6 through
the existing 120v AC electrical
wires in your home. Optional
Niles TW-523 interface module
is required. 

The RSL-6 is made in Miami,
Florida and comes with a limit-
ed two year parts and labor
warranty.

ALL OFF

button turns your

entire system off.

ALL

-

ON

button  enables you to

turn on all or some of your speakers
depending upon the rear panel DIP
switch settings.

Recessed areas for

custom room  labels.

Attractive low-

profile design.

Red 

POWER

LED turns green

momentarily confirming that an

IR command was detected.

ALL

-

ON

button  enables you to turn on

all or some of your speakers depending

upon the rear panel DIP switch settings.

Infrared Sensor

Red LED indicators

for each pair of

speakers.

Simple push-button 

ON

/

OFF

operation for each pair.

B

L E N D I N G

H

I G H

F

I D E L I T Y

A N D

A

R C H I T E C T U R E

®