Sony NSX-32GT1 User Manual

Page of 2
Connection
In the Box
Internet TV (1)
 Keypad (1)
 Size AA batteries (2)
 IR Blaster cable (1)
 AC power cord (1) 
  (except NSX-24GT1)
 Table-Top Stand (1)
 Cable cover (1)
 Screws (M4 x 10) (3) 
  (for NSX-24GT1)
 Screws (M5 x 16) (3) 
  (for NSX-32/40/46GT1)
 Quick Setup Guide (1)
 Reference Guide (1)
 Warranty card (1)
 End User License 
  Agreement (1)
Inserting batteries
AA-size (R6) 
Connect other devices
Connect the AV Receiver and other devices to the TV if necessary.
step
step
step
Connect the Cable/Satellite Box
Use one of the connection cables illustrated below. Then, place the IR Blaster near the 
remote sensor of the Cable/Satellite Box.
 When connecting the Cable/Satellite Box with an HDMI cable, you can use any HDMI jack on the TV.
 For details of network connection with the Cable/Satellite Box,  
see the operating instructions supplied with the Cable/Satellite Box.
 You can control a Cable/Satellite Box via the Home Network depending on your Cable/Satellite TV provider.  
For details, see “Help Guide” on the back side.
step
AV Receiver
Other Devices
Blu-ray Disc player/DVD player/Game etc.
Cable/Satellite Box
Router
HDMI cable, 
Component video/
audio cable or  
Video/audio cable
IR Blaster 
cable
Connect to the power source
Plug the TV into the wall outlet.
 Refer to the Table-Top Stand leaflet (supplied) for directions on how to 
attach the AC power cord (except NSX-24GT1) and the cable cover.
step
Press the 
 (on/standby) button
step
Start Internet TV setup
Follow the directions of the Initial Setup Wizard displayed on the screen.
 When you skip the Network Setup, only limited functions will be 
available with the TV.
 The screen may stay dark for several seconds after the Sony logo 
disappears. Wait for a while until the Initial Setup Wizard is displayed.
 It takes about 15 minutes to complete the Initial Setup.
* This illustration may differ from the actual display.
Connect to a network
When using wired connection, connect the TV and a router with 
a LAN cable. When using wireless connection, you need to set 
the Network Setup in the Initial Setup Wizard (on step 6).
Cable/Satellite Box
HDMI cable, 
Component video/
audio cable or 
Video/audio cable
IR Blaster 
cable
Router
Internet TV
Internet TV
Quick Setup Guide
Internet TV
NSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
Printed in U.S.A.
© 2010 Sony Corporation
4-197-994-13 (1)
Preparation
or   Wireless LAN
Router
Internet TV
LAN cable
Place the IR Blaster so that the infrared 
transmitter points to the remote sensor of 
the Cable/Satellite Box. For details on the 
IR Blaster, see “Help Guide” on the back 
side.
PLEASE READ END USER LICENSE 
AGREEMENT BEFORE USING  
THIS PRODUCT
Not the actual ratio
IR Blaster cable
Optical digital
cable
Note
  If your connection method differs from that shown above, see “Help Guide” (http://esupport.sony.com/internettv/helpguide/). For details on “Help Guide,” see the back side.