Sony RM-VL900T User Manual
24
GB
If a series of commands is already
programmed for that button
programmed for that button
That programme will be displayed.
(At the factory, the SYSTEM
CONTROL 1 button is preset with the
System Power-Off function for Sony
components (the same function as
explained in page 34), and the
SYSTEM CONTROL 3 button is
factory preset with standard power-
on command for nearly all Sony
components.)
To programme a new series of
operations, clear the programme first
(page 26).
(At the factory, the SYSTEM
CONTROL 1 button is preset with the
System Power-Off function for Sony
components (the same function as
explained in page 34), and the
SYSTEM CONTROL 3 button is
factory preset with standard power-
on command for nearly all Sony
components.)
To programme a new series of
operations, clear the programme first
(page 26).
2
Press the Component Select
buttton for the component to
operate.
buttton for the component to
operate.
The keys for the selected component
flash.
flash.
If the component has the power-
on and power-off signals
on and power-off signals
Both the OFF and ON keys are displayed
and you can select either of them to
programme.
and you can select either of them to
programme.
It is useful to set the exact command for
power-on or power-off and operate the
component regardless of its status (on/off).
power-on or power-off and operate the
component regardless of its status (on/off).
Example: To programme the
procedure above to the SYSTEM
CONTROL 2 button
procedure above to the SYSTEM
CONTROL 2 button
1
While pressing COMMANDER
OFF, press one of the SYSTEM
CONTROL buttons (in this case,
SYSTEM CONTROL 2).
OFF, press one of the SYSTEM
CONTROL buttons (in this case,
SYSTEM CONTROL 2).
All the component names flash.
Programming a series of
commands to the SYSTEM
CONTROL buttons
commands to the SYSTEM
CONTROL buttons
Executing a Series of Commands
— System Control Functions
(continued)
— System Control Functions
(continued)