Sony RM-VL900T User Manual
31
GB
Example: To programme the TV
button
button
1
While pressing COMMANDER
OFF, press 2 – and the desired
Component Select button.
OFF, press 2 – and the desired
Component Select button.
When the Power-on command is
programmed, you will hear a beep
and “1 ON” appears on the display.
(The display goes off when you
release the buttons.)
programmed, you will hear a beep
and “1 ON” appears on the display.
(The display goes off when you
release the buttons.)
To clear the Power-on command
Repeat the procedure above.
The following display appears.
The following display appears.
Adding an Extra
Function to the
Component Select
Buttons
Function to the
Component Select
Buttons
Programming the Power-On
command of the selected
component (for Sony
components only)
command of the selected
component (for Sony
components only)
When using Sony components, you can
programme the Power-on signal for each
component on a Component Select
button. You can select the desired
component and power it on by just
pressing that Component Select button.
programme the Power-on signal for each
component on a Component Select
button. You can select the desired
component and power it on by just
pressing that Component Select button.
Continued