Sony RM-VL900T User Manual

When the System Power-Off function is
active, you can turn off all Sony
components just by pressing the
COMMANDER OFF button for three
seconds.

• Some Sony components may not be turned

off with this function.

• The power-off signals are transmitted at

intervals that are set for the System Control
function set for the SYSTEM CONTROL 1
button (page 30). If you change the interval
for the SYSTEM CONTROL 1 button, the
interval of the System Power-Off function is
also changed.

1 While pressing COMMANDER OFF,

press PROGRAM + and 2 +.

2 While pressing the RESET key, press

the Component Select button which
you want to clear.

• You can programme a signal by “learning”

for a Component Select button for which a
System Control function (page 28) or the
Power-On function (page 31) has been
programmed. In this case, the System Control
function or the Power-On function is
overwritten and cannot be used. If you clear
the “learned” signal from the button, the
System Control function or the Power-On
function is resumed, and you can use it again.

• You cannot programme a System Control

function (page 28) for a Component Select
button for which a signal has been
programmed by “learning.”

• You can programme the Power-On function

for a Component Select button for which a
signal has been programmed by “learning,”
but then the Power-On function cannot be
used. If you clear a “learned” signal from the
button, you can use the Power-On function.