Sony RM-VL900T User Manual
38
GB
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons
In addition to their original System
Control functions (page 23), SYSTEM
CONTROL 1, 2 or 3 buttons can be
programmed to “learn” any remote
control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1, 2
or 3 buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Control functions (page 23), SYSTEM
CONTROL 1, 2 or 3 buttons can be
programmed to “learn” any remote
control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1, 2
or 3 buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
Example: To copy the settings of
the CD button to the VCR3
button
the CD button to the VCR3
button
1
While pressing COMMANDER
OFF, press VCR3.
OFF, press VCR3.
The keys for that component (VCR3)
flash.
flash.
2
While pressing VCR3, press CD.
The keys for CD flash.
3
Press COMMANDER OFF.
Assigning Other Components to
the Component Select Buttons
(continued)
the Component Select Buttons
(continued)