One For All 3034 User Manual

The illustration below and chart on the next page describe the

features and functions of the One For All® Easy 3 Device
universal remote control.

Stop Key

Play Key

Red Light
(LED)

Setup

Key

TV Key

Power
Key

CBL Key

VCR Key

Volume

and

Channel

Record

Key

Rewind

Key

Fast
Forward
Key

Pause Key

Mute
Glow Key

The LED flashes red to show that the
remote is working.

The TV, VCR  and CBL keys are used to
select the home
entertainment device you want to control.

The POWER key operates the same as on
your original remote.

The SETUP key is used to set up your
devices.

The Glow Keys:  VOL (Volume), CH
(Channel), and M (Mute) operate the same
as on your
original remote.  To activate the "Glow"
Feature, you must expose the Glow Keys
to bright light.  The length of time the
Glow Keys remain illuminated will be
determined by the length of time the
remote is exposed to bright light.  These
keys are also used to enter set-up codes for
your devices.

The REW (Rewind), FF (Fast Forward),
STOP,  PLAY, PAUSE and REC (Record)
keys control the same functions as those
found on your VCR remote.

RED Light (LED)

Thank you for purchasing the One For All®  Easy 3 Device

universal remote.  Before you can use your new
remote, you will need to program it. To do this, you need to tell
the remote what equipment you wish to operate.  This is done by
following these three easy steps.

Step 1:

Install two (2) new AAA alkaline batteries.

Step 2:

Look up the code for your TV, VCR or Cable Box.

Step 3:

Enter the code.