Pioneer PDP-5071 User Guide

En

Set up for the DIGITAL AUDIO output terminal (OPTICAL), 
depending on your AV receiver. 

Press 

HOME MENU.

Select “Option”. ( /  then 

ENTER)

Select “Digital Audio Out”. ( /  then 

ENTER)

Select “Dolby Digital” or “PCM”. ( /  then 

ENTER)

Press 

HOME MENU to exit the menu.

Use the PC terminals to connect a personal computer.

• The PC input terminals are DDC2B-compatible.

• Plug & Play may not correctly function, depending on the 

personal computer in use.

When connected to a personal computer, the input signal type 
is automatically identified. If the personal computer image 
does not come in clearly, you may need to use Auto Setup. See 
page 68.

To watch an image coming from the personal computer, press 

PC on the remote control unit or press INPUT on the Plasma 
Display to select “PC”.

• The PC terminals cannot be used for audio-visual 

equipment.

• A Macintosh adaptor may be required for use with some 

Macintosh computers.

For Dolby Digital encoded signals, outputs in the 
Dolby Digital format. For PCM encoded signals, 
outputs in the PCM format.

Always outputs in the PCM format regardless of the 
types of signals.

RGB cable 
(commercially 
available)

AV cable with a mini plug 
(commercially available)
(When PC audio is 
connected)

Viewed from below of 
the Plasma Display

R

G

B

Not connected

Not connected

GND (ground)

GND (ground)

GND (ground)

+5V

GND (ground)

Not connected

SDA

HD

VD

SCL

PDP6070HD.book  Page 75  Friday, May 19, 2006  5:01 PM