Polycom VIEWSTATION EX User Manual
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003
163
register
Registers the Telnet or RS-232 session to receive
notifications about Visual Concert FX events.
notifications about Visual Concert FX events.
unregister Unregisters the Telnet or RS-232 session to receive
notifications about Visual Concert FX events.
Example
vcbutton play
vcraudioout <yes|no|get>
Description
This command sets the VCR Audio Out Always On option. When
this option is enabled, the system can operate with two VCRs, one
for recording and one for play. This also allows the use of the VCR
audio out for room audio applications where the near-site and the
far-site audio are required with any video input selected.
this option is enabled, the system can operate with two VCRs, one
for recording and one for play. This also allows the use of the VCR
audio out for room audio applications where the near-site and the
far-site audio are required with any video input selected.
Note If you connect the same device to both the VCR input and
VCR output, you may need to disable this feature to prevent
an audio feedback loop.
an audio feedback loop.
yes
Enables the option
no
Disables the option.
get
Displays the current setting (yes or no).
Example
vcraudioout yes
User Interface Screen Location
System Info>Admin Setup>Video/Cameras>VCR: VCR Audio Out
Always On
Always On
vcraudioout