Polycom VIEWSTATION EX User Manual
ViewStation EX, ViewStation FX, and VS4000 API Guide
192
www.polycom.com
priswitch <set|get> <att5ess|att4ess|
norteldms|ni2|net5/ctr4>
priswitch set <att5ess|att4ess|norteldms|ni2|
priswitch set <att5ess|att4ess|norteldms|ni2|
net5/ctr4>
priswitch get
priswitch get
Description
This command sets the PRI switch. If more than one switch protocol
is supported, you must find out from your telephone service provider
which protocol to select. NET5/CTR4 is the default. It is the standard
ETSI protocol derived from ITU Q.931. If you change the country
settings, a new set of PRI switch protocols is loaded.
is supported, you must find out from your telephone service provider
which protocol to select. NET5/CTR4 is the default. It is the standard
ETSI protocol derived from ITU Q.931. If you change the country
settings, a new set of PRI switch protocols is loaded.
set
Sets the PRI switch. A parameter from
<att5ess|att4ess|norteldms|ni2|net5/ctr4> is
required.
<att5ess|att4ess|norteldms|ni2|net5/ctr4> is
required.
get
Displays the current switch protocol.
att5ess|att4ess|norteldms|ni2|net5/ctr4
Switch protocols. For E1, NET5/CTR4 is the default.
NET5/CTR4 is the standard ETSI protocol derived from
ITU Q.931. For T1, NET5/CTR4 is also provided for
certain Asian countries, such as Japan, Hong Kong,
and Taiwan.
NET5/CTR4 is the standard ETSI protocol derived from
ITU Q.931. For T1, NET5/CTR4 is also provided for
certain Asian countries, such as Japan, Hong Kong,
and Taiwan.
Example
priswitch set norteldms
User Interface Screen Location
System Info>Admin Setup>Video Network>IMUX>PRI Network>
PRI Setup: Switch Protocol
This screen is only accessible if you have a PRI network interface
connected to your ViewStation FX or VS4000 system.
connected to your ViewStation FX or VS4000 system.
priswitch