Pelco C2928M-QS (7/05) User Manual
4
C2928M-QS (7/05)
WALL DISPLAY – SECOND ROW AND UP
Figure 2.
Tie-Back Connection Points
DANGER:
Because the PMCD750 unit has a narrow front-to-back profile, the danger of tipping exists with high walls. For walls over two
units high and all tilted walls, use the four tie-back points (1/4-20 threaded holes) on the rear of the unit to secure the video wall to a
structural part of the building. If the wall is tilted forward, tie the wall all the way up. Do this as the wall is being built up; do not wait until
the wall is finished. Pelco does not provide any special brackets to secure the PMCD750 unit. The method to use is best determined on site
due to the many variables to consider, and must be capable of sustaining five times the weight of each PMCD750 unit – a total of
340 pounds (154 kilograms) per unit.
structural part of the building. If the wall is tilted forward, tie the wall all the way up. Do this as the wall is being built up; do not wait until
the wall is finished. Pelco does not provide any special brackets to secure the PMCD750 unit. The method to use is best determined on site
due to the many variables to consider, and must be capable of sustaining five times the weight of each PMCD750 unit – a total of
340 pounds (154 kilograms) per unit.
TIE BACK POINTS