PYLE Audio 7505-BTSDCM User Manual

•

Use only mild detergent or soapy water on a slightly damp cloth to clean the CH4000. 

Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is 

susceptible to harsh chemicals. It is partially soluble in oils, mineral spirits and gasoline 

and slowly decomposes in strong alkaline solutions.

•

To clean ink marks from the label, use isopropyl alcohol. 

•

When first connected to the DC power supply, the spare charger LED should turn ON 

and remain on for 3 seconds. If this does not occur, the charger is defective and requires 

service.

When an Ikôn is docked into a powered CH4000 and the Ikôn charge indicator LED stays 
off, there may be a problem with the unit or with the docking station. Use an Ikôn with a 
properly functioning charge indicator to isolate the problem.

If the Ikôn charge LED (the left-most LED) fast flashes green when it is docked:
•

Remove the Ikôn and disconnect the adaptor DC power cable. 

•

Wait at least 20 seconds, and then plug the cable in again. 

•

If the Ikôn LED still shows a fault, the Ikôn requires service.

•

Try inserting a battery that has been tested in another charger and is known to work.

•

If the spare charge slot LED continues to fast flash green with the known working bat-

tery, the charger is defective and requires service.

•