Vivitek dx6851 User Manual

DU6871/DW6851/DX6831 DLP Projector - User's Manual

Connecting to the External HDBaseT Transmitter

The projector has a built-in HDBaseT signal receiver� With the HDBaseT Transmitter

(optional), the video, RS-232 and LAN signals can be sent to the projector via a single

RJ-45 cable� If the HDBaseT Transmitter you purchased supports the input and output of

the IR remote control, the control signals from the IR remote control can be sent to the

DU6871/DW6851/DX6831 projector via the RJ-45 cable�

VGA IN

RJ45

Lan

HDMI

RS232

RJ45

HDBaseT

YPbPr

VGA Cable

DVD Player

Hub

RS-232c

RJ-45 Cat5e or above

Control PC

HDBaseT transmitter

Projector

Note:

• The projector supports the video signal, R-232, IR remote control and the reception of the network control

signals but do not support Power over Ethernet (PoE).

• Set the Control->RS232->Channel on the OSD menu to HDBaseT if you want to use the external

HDBaseT transmitter to send the RS232 command to the projector via the RJ45 cable and baud rate will

switch to 9600.

• If the command is sent via the HDBaseT transmitter, the longest transmission distance is 100 meters. The

projection may be interrupted or interfered, or the control signal cannot be sent if the transmission distance

is exceeded.

• Use the RJ-45 Cat5e or above cable and avoid entwining. Entwining may cause damage, interfere signal

transmission, reduce the transmission distance and degrade the image quality.