Sony KDF-E50A12U User Manual

1

Connect your aerial to the   socket on the 
rear of the TV.
If connecting to an aerial only (A)
Connect the   socket to the   socket on the rear 
of the TV with the supplied coaxial cable.
Go to step 3.
If connecting to a VCR with an aerial (B)
Go to step 2.

2

Connect your VCR.

1

Connect the   socket on the rear of the TV to 
the input socket on your VCR with the RF 
lead.

2

Connect the output socket on your VCR to the  

  socket on the rear of the TV with the 

supplied coaxial cable.

3

Connect the scart socket on your VCR to the 

/

2 scart socket on the rear of the TV 

with a scart lead.

Do not connect the mains lead to your mains socket until 
all connections are complete.

3

Bundle the cable.

4: Preventing the TV 
from toppling over

Sony strongly recommends using the TV stand SU-

RG11S (for KDF-E42A12U)/SU-RG11M (for KDF-

E50A12U) with a support belt designed for your TV.

5: Switching on the TV

1

Connect the TV to your mains socket (220-

240V AC, 50Hz).

2

Press 1 on the TV (front side).
When you switch on the TV for the first time, the 
message confirming the TV start auto-tuning 
appears on the screen. 
When the TV is in standby mode (the 1 (standby) 
indicator on the front of the TV is red), press TV 
+

/1 on the remote to switch on the TV, then go to 

page 13.

1

2