Sony KDF-E50A12U User Manual

Displays the “Digital Set Up” menu. You can change/set the digital settings using this menu.

1

Press OK to select “Digital Set Up”.

2

Press m/M to select the desired icon below, then press OK.

3

Press m/M to select one of the following options, then press OK.

Skips unused analogue channels when you press PROG +/- to 
select channels. (You can still select a skipped channel using the 
number buttons.)
1

Press M/m to select “Yes”, then press OK.

2

Press OK to select “Confirm”, then press OK.

To restore a skipped channel, select “No” in step 1.

Attenuates the RF signal. In case of a strong RF signal, some video 
interference may be displayed.
1

Press m/M to select “On”, then press OK.

2

Press OK to select “Confirm”, then press OK.

This option cannot be used if “AV2 Output” is set to “D-TV” (page 26).

Digital Set Up

Tunes in all the available digital channels.
Usually you do not need to do this operation because the channels 
are already tuned when the TV was first installed (page 13). 
However, this option allows you to repeat the process (e.g., to 
retune the TV after moving house, or to search for new channels 
that have been launched by broadcasters).
1

Press OK to start digital auto-tuning.
When all available digital channels have been tuned, a message 
stating that the auto-tuning process is finished appears.

2

Press < .

Digital Auto 
Tuning

Digital Tuning menu