AT&T G3 User Manual
Issue 2 April 1996
6-3
Connectivity
Port Terminations
Port Terminations
Port Terminations
Introduction
The termination of the connection on the PBX varies, depending
on the specific PBX.
on the specific PBX.
When to use
Establish the port terminations for the PBX after you have
connected the PBX and the data communications hardware.
connected the PBX and the data communications hardware.
Types of
ports
ports
The following table shows the ports that terminate the Proxy
Agent's connection.
Agent's connection.
Definitions
The types of ports are:
■
On DEFINITY G3r, the
system port
is an administered
resource; it is a system port because it is administered as
such. It requires a data board and pdata board.
such. It requires a data board and pdata board.
■
On DEFINITY G3i, the
netcon
is an internal channel that
can be assigned as a port.
— Use the add data-module command to assign the
netcon to an extension.
— Use the add hunt-group command to add the
netcon extension as a member of a hunt group.
If you have this
PBX …
PBX …
Then the Proxy Agent connection
terminates in a …
terminates in a …
DEFINITY G3r
system port
DEFINITY G3i
netcon port