Polycom Full Duplex Conference Phone and Wireless Microphone System User Manual

When the phone is off, up to six phone numbers can be stored from the remote keypad.

To program One-Touch dialing phone numbers, press 

. If the SoundStation Premier is

connected to a PBX, press either 8 or 9, then press 

(this inserts a two second delay so

the PBX can access an outside line). Next, type in the desired phone number, then press

, and finally press the desired location to store this phone number, 1-6. On the reverse

side of the remote keypad, there is a place to record these phone numbers.

To use 1-Touch dialing, simply press any of the six stored phone number locations. There is no
need to press 

.

▼

Check that all connections are correct and tight.

▼

Make sure the short cable is connected to a standard analog telephone line.

▼

Try a different telephone line.

▼

Don’t move the SoundStation Premier console while it’s in use.

▼

Keep your hands away from the unit during calls.

▼

Keep papers, cups, coffee pots, etc., away from the unit.

▼

At the beginning of a call, let someone at each location speak in turn for a few moments, to 
enable SoundStation Premier to adapt to its environment.

▼

The other party may be using lower-quality equipment or a half-duplex conference bridge, 
in which case there may be little you can do.

▼

Try calling again to see if another line provides a better connection.

SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide 

At any time during a phone call, press 

, then press 

on the main keypad to place a

call on 

, or simply press 

on the remote keypad. This shuts off the speaker and all

microphones. The display will show 

and all LEDs begin blinking red.

To take the phone off 

press only the 

key on the main keypad or 

on the

remote keypad. To shut off the microphones while keeping the speaker on, simply press

.

The display will show 

and the LED’s will turn from green to red. To take the phone off

, press 

on either keypad.

Press the redial key. The display on the main keypad shows the last phone number which you
have called or attempted to call.

Once a call is in progress, press the 

key.

A second dial tone will be heard and the display will read 

. To transfer the call, dial the

extension and hang up the phone by pressing 

. To make a 3-way conference call, dial

the second phone number. Once connected, press 

again, the two other parties will now

be connected.

SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User’s Guide 

Aux Out