Adtran 616 User Manual

Section 4  User Interface Guide

Total Access 600 Series System Manual

 86

© 2004 ADTRAN, Inc.

61200624L1-1B

This parameter displays the status of the Receive A signal bit. The high/low status is indicated by a 0 or 1.

This parameter displays the status of the Receive B signal bit. The high/low status is indicated by a 0 or 1.

Activate tests and monitor test status on a per port basis from this menu.

Displays the port number.

Choices are given below. Default is 

.

This option indicates whether a test is in progress.

View the FXO interface status and configure the FXO parameters from this menu. 

Indicates that no test is currently active.

Used to loop back DS0 data coming from the network for each channel. 
Received data is latched in on the appropriate receive time slot on the 
receive bus. This data is then placed on the transmit bus in the unit’s 
transmit time slot.

Used to test signaling sent to the network by the unit. On-hook signaling 
is sent to the network. The customer loop is forced on-hook while this 
test is active.

Used to test signaling sent to the network by the unit. Off-hook signaling 
is sent to the network. The customer loop is forced off-hook while this 
test is active.

The customer ring test will activate the unit’s ring relay in a 

 

2-on /4-off cadence, providing ringing to the customer loop.